radioman Posted July 17, 2012 Report Share Posted July 17, 2012 I need a little help here, networking is not exactly my field. I have 2 devices connected to a router. A NAS box and an ethernet accessed relay board used to remotely turn power on and off. I can access both individually when connected to the router by forwarding port 80 but this is not allowed when both are connected obviously. Neither device seems to allow changing the port it is accessed on. How can I configure the system to allow access to these 2 devices uniquely? Link to comment Share on other sites More sharing options...
Bar4 Posted July 18, 2012 Report Share Posted July 18, 2012 I need a little help here, networking is not exactly my field. I have 2 devices connected to a router. A NAS box and an ethernet accessed relay board used to remotely turn power on and off. I can access both individually when connected to the router by forwarding port 80 but this is not allowed when both are connected obviously. Neither device seems to allow changing the port it is accessed on. How can I configure the system to allow access to these 2 devices uniquely? NAS Box IP address 192.168.0.1 Relay Board IP Adress 192.168.0.2 Incoming on port 80 forward to 192.168.0.1:80 Incoming on port, say, 90 forward to 192.168.0.2:80 I dunno if the router will allow that config though. Cheers, MArk Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.