Jump to content

Need Some Networking Help


Recommended Posts

I need a little help here, networking is not exactly my field.

 

I have 2 devices connected to a router. A NAS box and an ethernet accessed relay board used to remotely turn power on and off. I can access both individually when connected to the router by forwarding port 80 but this is not allowed when both are connected obviously. Neither device seems to allow changing the port it is accessed on. How can I configure the system to allow access to these 2 devices uniquely?

Link to post
Share on other sites

I need a little help here, networking is not exactly my field.

 

I have 2 devices connected to a router. A NAS box and an ethernet accessed relay board used to remotely turn power on and off. I can access both individually when connected to the router by forwarding port 80 but this is not allowed when both are connected obviously. Neither device seems to allow changing the port it is accessed on. How can I configure the system to allow access to these 2 devices uniquely?

 

NAS Box IP address 192.168.0.1

Relay Board IP Adress 192.168.0.2

 

Incoming on port 80 forward to 192.168.0.1:80

Incoming on port, say, 90 forward to 192.168.0.2:80

 

I dunno if the router will allow that config though.

 

Cheers,

 

MArk

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...